sadump_part_header Struct Reference

Single-partition or diskset format header. More...

Data Fields
uint32_t	signature [2]
	Must be { SADUMP_PART_SIGNATURE0, SADUMP_PART_SIGNATURE1 }.
uint32_t	enable
	Is SADUMP enabled?
uint32_t	reboot
	Seconds until reboot after saving dump.
uint32_t	compress
	Memory image format.
uint32_t	recycle
	Can this dump device be recycled for another dump?
uint32_t	label [16]
	Dump device label.
struct efi_guid	sadump_id
	System UUID.
struct efi_guid	disk_set_id
	Disk set UUID or single-partition UUID.
struct efi_guid	vol_id
	Dump device UUID.
struct efi_time	time_stamp
	Wall-clock time of the dump.
uint32_t	set_disk_set
	ID of this disk in a disk set, or 0 for a single partition.
uint32_t	_pad
	Padding to a multiple of 64 bits.
uint64_t	used_device
	Amount of data saved to this device (bytes).
uint32_t	magicnum []
	Magic number for verification.

Detailed Description

Single-partition or diskset format header.

Field Documentation

compress

uint32_t sadump_part_header::compress

Memory image format.

Maybe not implemented?

enable

uint32_t sadump_part_header::enable

Is SADUMP enabled?

Apparently always 1.

label

uint32_t sadump_part_header::label[16]

Dump device label.

Unused?

---

The documentation for this struct was generated from the following file:

• src/kdumpfile/sadump.c